Deflection Registers - Double Curved Face

Model WSD-CFWSD-CF

DeflectionRegistersDoubleCurvedFace600x300 DeflectionRegistersDoubleCurvedFace600x300 Dia
DeflectionRegistersDoubleCurvedFace600x300 DeflectionRegistersDoubleCurvedFace600x300 Dia

Curved Face Double Deflection Registers are manufactured to suit installations on circular or oval Spiral Duct.

They consist of two separate rows of individually adjustable vanes and the frame is curved to suit the diameter of the Spiral Duct.

The FRONT VANES are horizontal so that the primary air leaving the outlet is directed above the room occupants and does not reach the occupied zone until well mixed with the secondary room air.

The REAR VANES are vertical and are used to direct the air in a straight blow or spread the air as required by the room layout. If required, air flow can be directed at an angle to one or both sides, and still retain a near-parallel air stream pattern.

Standard finish is powder coat white while other finishes are available to suit the interior and architectural design requirements.

DeflectionRegistersDoubleCurvedFace600x300 Dia